Perforated Sheet Metal from ADMAR - Type RG Perforated Sheet Metal with Round Holes
in straight rows (Shape RG according to DIN/ISO 24 041)

Because of the low stiffnes of this type of hole arrangement, these are mostly applied in specific applications, eg shopping racks.
pfeil.gif (972 Byte) Make your choice of material on the left.
Hole Dimensions:

Hole size W : The hole size w could be defined as the smallest dimension for the hole opening.

Hole Center Distance t : This is the distance from one hole center to any adjacent hole center. The DIN-Standard refers to this as hole devision.

Relative free hole surface area Ao% : This is defined as the permeability expressed as a percentage, based on one hole together with half the web width of the adjacent holes. This excludes the sheetmetal edges

Perforated Sheet Metal from ADMAR - Type RG
ADMAR Sheet Metal are available in three Standard Sizes:
Small Format (KF) 1000x2000mm,
Medium Format (MF) 1250X2500mm
Large Format (GF) 1500X3000mm.

For further information, please contact  :

Mr. Jacob v. Bremen

Phone : +49 30 789 039 42


Fax : +49 30 789 0399 0


e-mail :

To AnfrageformularEnquiry

Note: Any losses due to technical changes and errors can not be accounted for 10/03