Water Jet Cutting in our Machining Centre at Berlin

You send us your drawings via mail - e-mail or on CD-ROM. We are able to work with the following formats : *.DXF - *.DWG - *.IGS - *.PRD - *.WKF.

We send our quotation - free of charge.

  • Also possible for high thickness of the material
  • Without deformation of the material because of the production of heat
  • This process is suitable for the following materials : metals - composits - plastic - glass - stone - ceramics
  • Because of the use of multiple cutting heads, we are able to offer very good conditions and prices.

In our LASERcut centre we are maching the following materials :

  • steel - up to 20mm, stainless steel - up to 90mm
  • aluminium, copper, brass - up to 180mm
  • natural and artificial stone - up to 200mm
  • wood - up to 100mm
  • plastic, rubber, composits ceramics - up to 50mm
  • glass and multilayer glass - up to 150mm

Dimensions of the panels :

  • 6000 x 2000mm
  • longer panels - on AnfrageformularEnquiry

 Water Jet Cutting in our Machining Centre at Berlin

 Examples for Water Jet Cutting :

on the left side : aluminium (thickness =90mm)

on the right side : aluminium (thickness =130mm)

Water Jet Cutting with high pressure 

 Water Jet Cutting in our Machining Centre at Berlin

on the left side : stainless steel tubes on the cutting machine with four cutting heads

on the right side : aluminium workpiece (thickness 18mm) on the cutting machine with two cutting heads

Water Jet Cutting in our Machining Centre at Berlin 

Water Jet Cutting in our Machining Centre at Berlin 

For further information, please contact  :

Mr. Jacob v. Bremen

Phone : +49 30 789 039 42

 

Fax : +49 30 789 03990

 

e-mail : info@rotec-berlin.de

To AnfrageformularEnquiry

Note: Any losses due to technical changes and errors can not be accounted for 10/03