Fastening Devices for rotec Gratings
 
Single Fastening Clamps : used for protecting the grates against lift off and movement. Standard fastening by single fastening clamps.
Standard fastening by single fastening clamps.
Double Fastening Clamps : used for holding together two grates. In this way, dangerous stumbling edges can be avoided. Double Fastening Clamp
Double Fastening Clamp
Welded Blind for Socket Spanners - for easyly locking and unbolting of gratings (f.e. for the cleaning of light shafts). Also used for preventing unauthorized opening.

The blinds must be mounted before galvanizing the grates. Therefore it is necessary to order the blind together with the grating.
Welded Blind for Socket Spanners
Welded Blind for Socket Spanners
Screwed Blind for Socket Spanners - for the later mounting.
Screwed Blind for Socket Spanners
Screwed Blind for Socket Spanners
Hook Achor - for angular profiles. Special manufaturing of the hook due to the client's indications.
Hook Anchor - for angular profiles
Hook Anchor - for angular profiles
Security Chain - different lengths - for the fastening of grates. Security Chain

Security Chain
Hinge - connected with an angular frame. Special application for emergency exits - delivered with a blind for socket spanners.

The blinds must be mounted before galvanizing the grates. Therefore it is necessary to order the blind together with the grating.
Hinge
Hinge

For more details and Begriffetechnical terms about rotec gratings, please contact :

Mr. Jacob v. Bremen

Phone : +49 30 789 039 42

 

Fax : +49 30 789 03990

 

e-mail : info@rotec-berlin.de

To AnfrageformularEnquiry

Note: Any losses due to technical changes and errors can not be accounted for 11/03