Gratings for Light Shafts and Cellar Shafts
with frame =35 x 35 x 5 mm
mesh size =31x31 mm
due to DIN/EN24537, strip steel K60, hot-dip galvanized due to DIN/EN/ ISO1461
the first value is of the supporting bar which must be saddled on both sides !!!

heigth x thickness
of the supporting bar

format :
(supporting bar x spacing bar)

 article no.
30 x 2 mm

800 x 600 mm

20030

1000 x 600 mm

20031

1200 x 600 mm

21132
Gratings for Gutters
without frame
mesh size 31x31 mm
due to DIN/EN24537, strip steel K60, hot-dip galvanized due to DIN/EN/ ISO1461
the first value is of the supporting bar which must be saddled on both sides !!!

heigth x thickness
of the supporting bar

format :
(supporting bar x spacing bar)

 article no.
30 x 2 mm

150 x 1000 mm

20034

200 x 1000 mm

20035

250 x 1000 mm

20036

300 x 1000 mm

20037
Steel Gratings - type EP
 without frame
due to DIN/EN24537, strip steel K60, not galvanized
the first value is of the supporting bar which must be saddled on both sides !!!

heigth x thickness
of the supporting bar

format :
(supporting bar x spacing bar)

mesh size

 article no.
30 x 2 mm

3000 x 1350 mm

31 x 9 mm

10410

3000 x 1350 mm

31 x 31 mm

20202

For more details and Begriffetechnical terms about rotec gratings, please contact  :

Mr. Jacob v. Bremen

Phone : +49 30 789 039 42
 

Fax : +49 30 789 03990
 

e-mail : info@rotec-berlin.de

To AnfrageformularEnquiry

Note: Any losses due to technical changes and errors can not be accounted for 11/03