Gratings and Panels from ADMAR - Non-slip Safety Stairs

Description :

rotec stairs are made for linear staircases

the front edge is folded

material : hot-dipped galvanized steel STW22 - due to DIN ISO EN 1461 - or stainless steel

easy mounting of system stairs - or special manufacturing of stairs perforated or frofilated rotec panels

look also

Perforated and profilated panels

Specifications :

permissible load - due to DIN / ISO1055 - section 3 - DIN / ISO24530

the stairs have non perforated zones on both sides

rotec stairs are designed for uniformely distributed load =5kN/m²

and concentrated load =1,5kN upon loaded area =200 x 200mm

Load tables for perforated and profilated panels

Special manufacturing :
È Spacial manufacturing due to the ckliet's indications - on Enquiry.

Non-slip Safety Stairs from ADMAR

Non-slip Safety Stairs from ADMAR

Stairs - type STABLE
perforated panels - type STABLE

stainless steel 1.4571
width (B)	length (L)	hole (N)	article no.
270 mm	1000 mm	150 mm	44337

H1/H2 = 40/62 mm, material thickness =2,0 mm

Panelli perforati di ADMAR - scalini - tipo stabile

hot-dip galvanized steel STW22
width (B)	length (L)	hole (N)	article no.
240 mm	600 mm	120 mm	44313
270 mm	600 mm	150 mm	44314
240 mm	700 mm	120 mm	44315
270 mm	700 mm	150 mm	44316
240 mm	800 mm	120 mm	44317
270 mm	800 mm	150 mm	44318
300 mm	800 mm	180 mm	44319
240 mm	900 mm	120 mm	44320
300 mm	900 mm	180 mm	44321
240 mm	1000 mm	120 mm	44322
270 mm	1000 mm	150 mm	44323
300 mm	1000 mm	180 mm	44324
240 mm	1100 mm	120 mm	44325
300 mm	1100 mm	180 mm	44326
240 mm	1200 mm	120 mm	44327
270 mm	1200 mm	150 mm	44328
300 mm	1200 mm	180 mm	44329

Stairs - type ROUND-S
perforated panels - type ROUND-S

stainless steel 1.4571
width (B)	length (L)	hole (N)	article no.
270 mm	1000 mm	150 mm	44337

H1/H2 = 40/70 mm, material thickness =2,0 mm

Panelli perforati di ADMAR - scalini - tipo tondo-s

hot-dip galvanized steel STW22
width (B)	length (L)	hole (N)	article no.
240 mm	600 mm	120 mm	44313
270 mm	600 mm	150 mm	44314
240 mm	700 mm	120 mm	44315
270 mm	700 mm	150 mm	44316
240 mm	800 mm	120 mm	44317
270 mm	800 mm	150 mm	44318
300 mm	800 mm	180 mm	44319
240 mm	900 mm	120 mm	44320
300 mm	900 mm	180 mm	44321
240 mm	1000 mm	120 mm	44322
270 mm	1000 mm	150 mm	44323
300 mm	1000 mm	180 mm	44324
240 mm	1100 mm	120 mm	44325
300 mm	1100 mm	180 mm	44326
240 mm	1200 mm	120 mm	44327
270 mm	1200 mm	150 mm	44328
300 mm	1200 mm	180 mm	44329

Stairs - type ROUND-N
perforated panels - type ROUND-N

Panelli perforati di ADMAR - scalini - tipo tondo-n

H1/H2 = 40/70 mm, material thickness =2,0 mm

hot-dip galvanized steel STW22
width (B)	length (L)	hole (N)	article no.
240 mm	800 mm	120 mm	44773
270 mm	800 mm	150 mm	44774
300 mm	800 mm	180 mm	44775
240 mm	1000 mm	120 mm	44776
270 mm	1000 mm	150 mm	44777
300 mm	1000 mm	180 mm	44778

Panelli perforati di ADMAR - scalini - tipo tondo-n

Stairs - type ROUND-K
perforated panels - type ROUND-K

Panelli perforati di ADMAR - scalini - tondo-k

H1/H2 = 40/70 mm, material thickness =2,0 mm

hot-dip galvanized steel STW22
width (B)	length (L)	hole (N)	article no.
240 mm	800 mm	120 mm	44330
240 mm	1000 mm	120 mm	44331
270 mm	1000 mm	150 mm	44339

Panelli perforati di ADMAR - scalini - tondo-k

Stairs - type CONE
perforated panels - type CONE

Panelli profilati di ADMAR - scalini - tipo cono

H1/H2 = 40/70 mm, material thickness =2,0 mm

hot-dip galvanized steel STW22
width (B)	length (L)	hole (N)	article no.
240 mm	800 mm	120 mm	44332
240 mm	1000 mm	120 mm	44333
270 mm	1000 mm	150 mm	44334

Stairs - type RUBBER BUMPS
perforated panels - type RUBBER BUMPS

Panelli perforati di ADMAR - scalini - tipo nodi di gomma

H1/H2 = 40/70 mm, material thickness =2,0 mm
The rubber bumps are available in black or red colour.

hot-dip galvanized steel STW22
width (B)	length (L)	hole (N)	article no.
270 mm	800 mm	120 mm	44335
270 mm	1000 mm	120 mm	44336

For further information, please contact :

Mr. Jacob v. Bremen	Phone : +49 30 789 039 42
	Fax : +49 30 789 03990
	e-mail : info@rotec-berlin.de

Note: Any losses due to technical changes and errors can not be accounted for 12/03