Fastening Plates - Type OLIVE   - for fastening of perforated safety panels type STABLE
perforation type STABLE

Standard fastening for perforated panels type STABLE - by fastening using plates - when the panels can be screwed from above or when the saddles are accessible. The fastening plates are made from galvanized cast steel.
 

material	article no.
galvanized cast steel - with bore for countersunk screws	44101
galvanized cast steel - with round bore	44102
plastic - with bore for countersunk screws	44103

Fastening Plates - Type OLIVE   - for fastening of perforated safety panels type STABLE-S
perforation type STABLE-S

Standard fastening for perforated panels type STABLE-S - by using fastening plates - when the panels can be screwed from above or when the saddles are accessible. The fastening plates are made from galvanized cast steel.
 

material	article no.
galvanized cast steel - with bore for countersunk screws	44215

Fastening Plates - Type DISC or STAR   - for fastening of perforated safety panels type ROUND-S
perforation type ROUND-S

Standard fastening for perforated panels type ROUND-S - by using fastening plates - when the panels can be screwed from above or when the saddles are accessible. The fastening plates are made from galvanized cast steel.
 

material	article no.
galvanized cast steel - with bore for countersunk screws	44217
plastic - with bore for countersunk screws	44216

Distance Piece - for all types of perforated and profilated panels from rotec

Distance piece for screwing together two neighbouring panels.

material	height (X)	article no.
galvanized steel	40mm	44108
	50mm	44109
	75mm	44110
	100mm	44111
stainless steel	40mm	44112
	50mm	44113
	75mm	44114

Connecting Piece - for all types of perforated and profilated panels from rotec

Connecting piece for screwing together two neighbouring panels.
 

material	height (H)	article no.
galvanized steel	40mm	44218
	50mm	44219
	75mm	44220

Longitudinal Connector - for all types of perforated and profilated panels from rotec

Longitudinal connector for screwing together two neighbouring panels.
 

materiale	height (H)	article no.
galvanized steel	40mm	44104
	50mm	44105
	75mm	44106
	100mm	44107

Fastening Clip - Type C - with OLIVE Plates or DISCs

For the closed installation - when the saddles are not accessible.
The set includes the corpus with clip, the plate / or disc and the screw.

Clip-C   galvanized steel	height (H)	article no.
for type STABLE:  with OLIVE plate	40 mm	44149
	50 mm	44150
	75 mm	44151
for type ROUND-S:  with disc	40 mm	44152
	50 mm	44153
	75 mm	44154
Clip-C   stainless steel	height (H)	article no.
for type STABLE:  with OLIVE plate	40 mm	44155
	50 mm	44156
for type ROUND-S:  with disc	40 mm	44157
	50 mm	44158

Fastening Clip - Type C - with OLIVE Plates or DISCs

Compensation Angle

Mr. Jacob v. Bremen

Phone : +49 30 789 039 42

Fax : +49 30 789 03990

e-mail : info@rotec-berlin.de