Woven and Punched Wire Meshes.

Woven Wire Meshes from rotec - for Fences and Barriers

Our woven wire meshes are manufactured due to DIN / ISO / EN 4192 - with quadruple cranked wire - and quadratic meshes.

Suitable for partition walls - racks - safety coverings for machines - boxes - fences - gates - balustrades... etc.

Woven Wire Mesh from ADMAR

L	=	Length
B	=	Width
ML	=	Mesh Width - longitudinal
MQ	=	Mesh Width - transversal
DL	=	Diameter of the Wire - longitudinal
DQ	=	Diameter of the Wire - transversal
DU	=	Jut Out of the Wire
RM	=	Peripheral Mesh

Woven Wire Mesh from ADMAR

The woven wire meshes from rotec in our stock :

galvanized or raw steel - stainless steel no. 1.4301. Special manufacturing - due to the client's indications : aluminium or high temperature resistant steel and other non ferrous metals.

Woven Wire Mesh - Stainless Steel no. 1.4301

Article no.	Division [mm]	Diameter (Wire) [mm]	Length [mm]	x	Width [mm]	Jut Out	Weigth [kg/pezzo]	Delivery Time
701220E	12,5 x 12,5	2,0 x 2,0	2.000	x	1.000	open	8,0	1 week
702025E	20 x 20	2,0 x 2,0	2.000	x	1.000	open	5,0	immediately
703030E	30 x 30	3,0 x 3,0	2.000	x	1.000	open	7,3	immediately
704040E	40 x 40	4,0 x 4,0	2.000	x	1.000	open	10,6	immediately
other meshes - on Enquiry

Woven Wire Mesh - Galvanized Steel

Article no.	Division [mm]	Diameter (Wire) [mm]	Length [mm]	x	Width [mm]	Jut Out	Weigth [kg/pezzo	Delivery Time
701020KV	10 x 10	2,0 x 2,0	2.000	x	1.000	open	8,4	immediately
701220KV	12 x 12	2,0 x 2,0	2.000	x	1.000	open	8,0	immediately
702020KV	20 x 20	2,0 x 2.0	2.000	x	1.000	open	5,0	immediately
702025KV	20 x 20	2,5 x 2,5	2.000	x	1.000	open	7,6	1 week
702025MV	20 x 20	2,5 x 2,5	2.500	x	1.250	open	11,9	1 week
702030KV	20 x 20	3,0 x 3,0	2.000	x	1.000	open	8,0	1 week
702530KV	25 x 25	3,0 x 3,0	2.000	x	1.000	open	7,6	1 week
702530GV	25 x 25	3,0 x 3,0	3.000	x	1.500	open	17,1	1 week
703030KV	30 x 30	3,0 x 3,0	2.000	x	1.000	open	7,2	immediately
703040KV	30 x 30	4,0 x 4,0	2.000	x	1.000	open	13,4	1 week
704030KV	40 x 40	3,0 x 3,0	2.000	x	1.000	open	5,8	1 week
704040KV	40 x 40	4,0 x 4,0	2.000	x	1.000	open	9,4	immediately
704040MV	40 x 40	4,0 x 4,0	2.500	x	1.250	open	14,7	1 week
704040GV	40 x 40	4,0 x 4,0	3.000	x	1.500	open	22,0	immediately
704040SV1	40 x 40	4,0 x 4,0	2.000	x	2.000	open	19,0	1 week
704040SV2	40 x 40	4,0 x 4,0	2.000	x	5.000	open	47,0	1 week
704050KV	40 x 40	5,0 x 5,0	2.000	x	1.000	open	15,5	1 week
704050KV	40 x 40	5,0 x 5,0	2.500	x	1.250	open	24,0	1 week
705040KV	50 x 50	4,0 x 4,0	2.000	x	1.000	open	8,2	immediately
705050KV	50 x 50	5,0 x 5,0	2.000	x	1.000	open	12,4	1 week
705050SV1	50 x 50	5,0 x 5,0	2.000	x	2.000	open	25,0	1 week
other meshes - on Enquiry

Woven Wire Mesh - Raw Steel - ready for later Coatings

Article no.	Division [mm]	Diameter (Wire) [mm]	Length [mm]	x	Width [mm]	Jut Out	Weigth [kg/pezzo	Delivery Time
703030KR	30 x 30	3,0 x 3,0	2.000	x	1.000	open	7,2	immediately
704040KR	40 x 40	4,0 x 4,0	2.000	x	1.000	open	9,4	immediately
704040GR	40 x 40	4,0 x 4,0	3.000	x	1.500	open	22,0	immediately
704040SR1	40 x 40	4,0 x 4,0	2.000	x	2.000	open	19,0	1 week
704040SR2	40 x 40	4,0 x 4,0	2.000	x	5.000	open	47,0	1 week
705040KR	50 x 50	4,0 x 4,0	2.000	x	1.000	open	8,2	immediately
705040SR2	50 x 50	4,0 x 4,0	5.000	x	2.000	open	41,	1 week
705050KR	50 x 50	5,0 x 5,0	2.000	x	1.000	open	12,4	immediately
705050SR1	50 x 50	5,0 x 5,0	2.000	x	2.000	open	25,0	1 week
705050SR2	50 x 50	5,0 x 5,0	2.000	x	5.000	open	56,0	1 week
other meshes - on Enquiry

Punched Wire Meshes from rotec

Special Manufacturing

Punched wire meshes - single side cranked - made fron galvanized steel, stainless steel or aluminium.

Delivery time : about 3 weeks

Punched Wire Mesh from ADMAR

For further information, please contact :

Mr. Jacob v. Bremen	Phone : +49 30 789 039 42
	Fax : +49 30 789 03990
	e-mail : info@rotec-berlin.de

To Enquiry

Note: Any losses due to technical changes and errors can not be accounted for 10/03