Spike Strip - Type Wire - DUO

Spike Strip  - type Wire - DUO

The stainless steel spikes are welded on the wire strip (distance between the wires =16mm). The strip can be easily cut to the right lenth by pliers. Fastening of the strips by fastening plates. Also available as "type Sheet Metal DUO" (Article no. 13103)
Article no. 13101

Specifications :
total width
65mm
height of the spikes =110mm
diameter of the spikes =2,0mm (wire)
length of the strip =1000mm

- The spike strips are well visible for the birds. Therefore it is improbable that the birds injure themselfes.

- The strips can be cut easily by pliers to the right length.

- For a better protection on places at risk, more rows of strips can be installed side by side.

- Combinable with type - Sheet Metal - QUATTRO.

  • packaging : 100 strips  1m per packaging unit

Spike Strip  - type Wire - DUO

Spike Strip  - type Wire - DUO

MOUNTING ACCESSORIES

Bird Spikes and Nets - mounting accessories

Fastening Plates                                                                          

  • stainless steel - material no. 1.4401 - dimensions : 20 x 40 x 0,65mm - equipped with two reinforcing creases and and bore for screwing -    packaging : 100 pieces per packaging unit - screws and suitable dowels are available. 
    Article no. 13401

For further information, please contact  :

Mr. Jacob v. Bremen

Phone : +49 30 789 039 42

 

Fax : +49 30 789 03990

 

e-mail : info@rotec-berlin.de

To AnfrageformularEnquiry

 Note: Any losses due to technical changes and errors can not be accounted for 10/03