Strip - Type Sheet Metal - QUATTRO
Strip - type
Sheet Metal - QUATTRO
The stainless steel spikes are welded on the spike strip (width of
the strip =20mm). Fastening of the strips by
using a silicone bonding agent. The strips are also
prepared for the fastening by screws. Also available
as "type Wire DUO" (Article no. 13102)
total width 50/150mm
height of the spikes =110mm
of the spikes =2,0mm (wire)
length of the
spike strips are well visible for the birds.
Therefore it is improbable
that the birds injure themselfes.
strips can be cut easily by metal shears to the right length.
For a better protection on places at risk, more
rows of strips can be installed side by side.
Combinable with type - Sheet Metal - QUATTRO.
: 50 strips à 1m per packaging unit
steel - material no.
1.4401 - dimensions : 20 x 40 x 0,65mm - equipped with
two reinforcing creases and and bore for screwing - packaging
: 100 pieces per packaging
unit - screws and suitable dowels are available.
further information, please contact :
Any losses due to technical
changes and errors can not be accounted for 10/03