Spike Strip - Type Sheet Metal - DUO

Spike Strip - type Sheet Metal - DUO
Article no. 13103

The stainless steel spikes are welded on the spike strip (width of the strip =20mm). Fastening of the strips by using a silicone bonding agent. The strips are also prepared for the fastening by screws. Also available as "type Wire DUO" (Article no. 13101)

Specifications :
total width 65mm
height of the spikes =110mm
diameter of the spikes =2,0mm (wire)
length of the strip =1000mm

- The spike strips are well visible for the birds. Therefore it is improbable that the birds injure themselfes.

- The strips can be cut easily  by metal shears to the right length.

- For a better protection on places at risk, more rows of strips can be installed side by side.

- Combinable with type - Sheet Metal - QUATTRO.

  • packaging : 100 strips à 1m per packaging unit

Spike Strip - type Sheet Metal - DUO

Spike Strip - type Sheet Metal - DUO

MOUNTING ACCESSORIES

Bird Spikes and Nets - mounting accessories

Fastening Plates                                                                          

  • stainless steel - material no. 1.4401 - dimensions : 20 x 40 x 0,65mm - equipped with two reinforcing creases and and bore for screwing -    packaging : 100 pieces per packaging unit - screws and suitable dowels are available. 
    Article no. 13401

Bird Spikes and Nets - mounting accessories

Silicone Bonding Agent

  • Cartridge - charge =310ml - on Enquiry with pistol for the cartridge
    Article no. 13414

For further information, please contact  :

Mr. Jacob v. Bremen

Phone : +49 30 789 039 42
 

Fax : +49 30 789 03990
 

e-mail : info@rotec-berlin.de

To AnfrageformularEnquiry

 Note: Any losses due to technical changes and errors can not be accounted for 10/03