Metal String Holder - type X-TRA - protected against underflying

Metal String Holder - standard type X-TRA

Metal String Holder - type X-TRA - protected against underflying
Article no. 13215

The string holders are welded on the stainless steel wire strip (alternately straight and crossed - length of the strip =15mm). Underflying of the strings can be avoided in this way. The stainless steel string will be fastened on the string holders. The strip can be easily cut to the right lenth by pliers. Also available as single parts.

Specifications :
altezza di spine =100mm
height of the spikes =4,0mm (filo)
length of the strip =480mm

- The spike strips are well visible for the birds. Therefore it is improbable that the birds injure themselfes.

- The strips can be cut easily by pliers to the right length.

- For a better protection on places at risk, more rows of strips can be installed side by side.

packaging : 10 strips à 0.48m per packaging unit

Instructions for mounting string holders

Instruction for mounting ridge tiles

Metal String Holder - type X-TRA - protected against underflying

MOUNTING ACCESSORIES

Bird Spikes and Nets - mounting accessories

Fastening Plates

stainless steel - material no. 1.4401 - dimensions : 20 x 40 x 0,65mm - equipped with two reinforcing creases and and bore for screwing - packaging : 100 pieces per packaging unit - screws and suitable dowels are available.
Article no. 13401

ACCESSORIES for STRING HOLDERS and PROTECTION NETS
	Strings stainless steel - material no. 1.4401, diameter a) =0,54mm Article no. 13201, b) =1,0mm Article no. 13205, c) =1,5mm Article no. 13211, d) =2,0mm Article no. 0000 available on bobbins (1000m / other lenthes on Enquiry) - diameter 1,5mm. Also suitable for reinforcing of stainless steel and PERLON nets. special manufacturing on Enquiry.
	Clamping Device aluminium sleeves - suitable for all string types - packaging : 1000 sleeves per packaging unit
	Springs stainless steel - material no. 1.4310 - suitable for all string types - packaging : 500 springs per packaging unit
	String Tensioner stainless steel - material no. 1.4310 - also available as single piece Article no. 13407
	Clamping Rings (aluminium) - packaging : 2500 rings per packaging unit Article no. 13410 Pliers for Clamping Rings available as single piece Article no. 13411

For further information, please contact :

Mr. Jacob v. Bremen	Phone : +49 30 789 039 42
	Fax : +49 30 789 03990
	e-mail : info@rotec-berlin.de

To Enquiry

Note: Any losses due to technical changes and errors can not be accounted for 10/03