ADMAR Metal String Holder - standard type.

Metal String Holder - standard type

Metal String Holder - standard type
Article no. 13214

The string holders are welded on the stainless steel wire strip (length of the strip =15mm). The stainless steel string will be fastened on the string holders. The strip can be easily cut to the right lenth by pliers. Also available as single parts.

Specifications :
total width 50mm
height of the spikes =100mm
diameter of the spikes =4,0mm (wire)
length of the strip =600mm

- The spike strips are well visible for the birds. Therefore it is improbable that the birds injure themselfes.

- The strips can be cut easily by pliers to the right length.

- For a better protection on places at risk, more rows of strips can be installed side by side.

packaging : 10 strips à 0.6m per packaging unit

Instructions for mounting string holders

Instruction for mounting ridge tiles

Metal String Holder - standard type

MOUNTING ACCESSORIES

Bird Spikes and Nets - mounting accessories

Fastening Plates

stainless steel - material no. 1.4401 - dimensions : 20 x 40 x 0,65mm - equipped with two reinforcing creases and and bore for screwing - packaging : 100 pieces per packaging unit - screws and suitable dowels are available.
Article no. 13401

ACCESSORIES for STRING HOLDERS and PROTECTION NETS
	Strings stainless steel - material no. 1.4401, diameter a) =0,54mm Article no. 13201, b) =1,0mm Article no. 13205, c) =1,5mm Article no. 13211, d) =2,0mm Article no. 0000 available on bobbins (1000m / other lenthes on Enquiry) - diameter 1,5mm. Also suitable for reinforcing of stainless steel and PERLON nets. special manufacturing on Enquiry.
	Clamping Device aluminium sleeves - suitable for all string types - packaging : 1000 sleeves per packaging unit
	Springs stainless steel - material no. 1.4310 - suitable for all string types - packaging : 500 springs per packaging unit
	String Tensioner stainless steel - material no. 1.4310 - also available as single piece Article no. 13407
	Clamping Rings (aluminium) - packaging : 2500 rings per packaging unit Article no. 13410 Pliers for Clamping Rings available as single piece Article no. 13411

For further information, please contact :

Mr. Jacob v. Bremen	Phone : +49 30 789 039 42
	Fax : +49 30 789 03990
	e-mail : info@rotec-berlin.de

To Enquiry

Note: Any losses due to technical changes and errors can not be accounted for 10/03