Spike Strip - Type Gutter Protection

Spike Strip - type Gutter Protection
Article no. 13105

Special bird spikes for the protection of gutters. The V-shaped spikes are fastened on the strip which is prepared to fastened on the gutter by using sheet metal plates. (length =65mm).

Specifications :
total width
height of the spikes =105/140mm
diameter of the spikes =1,3mm (wire)
length of the strip =1000mm

- The spike strips are well visible for the birds. Therefore it is improbable that the birds injure themselfes.

- The strips can be cut easily  by metal shears to the right length.

- For a better protection on places at risk, more rows of strips can be installed side by side.

- Combinable with type - Sheet Metal - QUATTRO.

  • packaging : 100 strips  1m per packaging unit

Spike Strip - Type Gutter Protection

Spike Strip - Type Gutter Protection


Bird Spikes and Nets - mounting accessories

Fastening Plates                                                                          

  • stainless steel - material no. 1.4401 - dimensions : 20 x 40 x 0,65mm - equipped with two reinforcing creases and and bore for screwing -    packaging : 100 pieces per packaging unit - screws and suitable dowels are available. 
    Article no. 13401

Bird Spikes and Nets - mounting accessories

Silicone Bonding Agent

  • Cartridge - charge =310ml - on Enquiry with pistol for the cartridge
    Article no. 13414

For further information, please contact  :

Mr. Jacob v. Bremen

Phone : +49 30 789 039 42


Fax : +49 30 789 03990


e-mail : info@rotec-berlin.de

To AnfrageformularEnquiry

 Note: Any losses due to technical changes and errors can not be accounted for 10/03